OFDM allows for efficient use of the available spectrum by dividing it into multiple subcarriers, which increases the spectral efficiency.

64-QAM (64-Quadrature Amplitude Modulation) is commonly used in 5G OFDM systems due to its high spectral efficiency and moderate complexity.

The cyclic prefix is a known sequence of symbols added to the beginning of each OFDM symbol to eliminate inter-symbol interference caused by multipath propagation.

5G OFDM systems employ adaptive modulation and coding, MIMO, and beamforming to improve spectral efficiency, coverage, and reliability.

The resource grid in 5G OFDM defines the frequency and time resources available for data transmission, allowing for flexible allocation of resources to different users and services.

OFDM (Orthogonal Frequency Division Multiplexing) is a multiplexing technique used in 5G systems, but it is not a modulation technique. Modulation techniques, such as QPSK and QAM, are used to encode data onto the OFDM subcarriers.

Beamforming in 5G OFDM systems aims to focus the signal in a specific direction, thereby improving the signal strength and reducing interference in that direction.

MIMO in 5G OFDM systems provides increased spatial diversity, improved spectral efficiency, and enhanced reliability by utilizing multiple antennas at both the transmitter and receiver.

Power allocation in 5G OFDM systems aims to optimize the signal-to-noise ratio (SNR) of each subcarrier, balance the power among different users, and reduce interference between subcarriers.

Improved spectral efficiency is a benefit of using OFDM in 5G systems, not a challenge.

The FFT in OFDM systems performs all of the mentioned tasks: converting the time-domain signal into the frequency domain, generating the OFDM symbols, and demodulating the received OFDM symbols.

256-QAM (256-Quadrature Amplitude Modulation) offers the highest spectral efficiency among the mentioned modulation techniques, but it also has a higher bit error rate (BER) compared to lower-order modulation schemes.

Adaptive modulation and coding (AMC) in 5G OFDM systems aims to match the channel conditions and improve data throughput by dynamically adjusting the modulation scheme and coding rate based on the channel quality.

Increased latency is not a benefit of using OFDM in 5G systems. OFDM is known for its ability to reduce multipath fading, improve resistance to interference, and enhance spectral efficiency.

The cyclic prefix in OFDM systems is primarily used to eliminate inter-symbol interference (ISI) caused by multipath propagation. It is a known sequence of symbols added to the beginning of each OFDM symbol to ensure that the receiver can distinguish between symbols.