To create a continuous light source

To freeze motion

To provide ambient lighting

To create a soft, diffused light

Strobe lights emit a continuous stream of light, while continuous lights emit short, intense bursts.

Strobe lights are more powerful than continuous lights.

Strobe lights are more portable than continuous lights.

Strobe lights are less expensive than continuous lights.

1/1000th of a second

1/2000th of a second

1/4000th of a second

1/8000th of a second

The higher the power, the better the ability to freeze motion.

The lower the power, the better the ability to freeze motion.

Power has no effect on the ability to freeze motion.

The relationship between power and freezing motion is unpredictable.

To provide continuous illumination for focusing and composition.

To trigger the strobe light.

To cool the strobe light.

To adjust the color temperature of the strobe light.

A monolight uses a single strobe light, while a multi-light setup uses multiple strobe lights.

A monolight is more portable than a multi-light setup.

A monolight is less expensive than a multi-light setup.

All of the above.

To shape and control the direction of light.

To soften the light.

To increase the power of the light.

To change the color of the light.

The intensity of light decreases as the square of the distance from the light source increases.

The intensity of light increases as the square of the distance from the light source increases.

The intensity of light is not affected by the distance from the light source.

The intensity of light decreases linearly as the distance from the light source increases.

To connect the strobe light to the camera.

To trigger the strobe light.

To adjust the power of the strobe light.

To change the color temperature of the strobe light.

A hot shoe is used for mounting external flashes, while a PC sync port is used for connecting studio strobes.

A hot shoe is located on the top of the camera, while a PC sync port is located on the side of the camera.

A hot shoe provides power to external flashes, while a PC sync port does not.

All of the above.

To soften the light.

To increase the power of the light.

To change the color of the light.

To focus the light.

Barn doors are used to shape the light, while honeycomb grids are used to focus the light.

Barn doors are more effective at controlling light spill than honeycomb grids.

Honeycomb grids are more effective at creating a soft, even light than barn doors.

Both barn doors and honeycomb grids can be used to create special effects.

To create a narrow beam of light.

To soften the light.

To increase the power of the light.

To change the color of the light.

Reflectors are used to bounce light back onto the subject, while scrims are used to block light.

Reflectors are more effective at creating a soft, even light than scrims.

Scrims are more effective at controlling light spill than reflectors.

Both reflectors and scrims can be used to create special effects.

To change the color of the light.

To soften the light.

To increase the power of the light.

To focus the light.