Back
0

Safety Procedures and Regulations

Description: This quiz evaluates your knowledge on safety procedures and regulations in various settings.
Number of Questions: 15
Created by:
Tags: safety regulations procedures workplace safety personal protective equipment
Start the Quiz
Attempted 0/15 Correct 0 Score 0
‹
›

Which of the following is NOT a common type of personal protective equipment (PPE) used in construction sites?

  1. Hard hat

  2. Safety glasses

  3. Steel-toed boots

  4. Lab coat

Show answer
Correct Option: D
Explanation:

A lab coat is not typically used as PPE in construction sites. It is more commonly used in laboratory settings.

According to OSHA regulations, what is the maximum allowable exposure limit (PEL) for noise in an 8-hour workday?

  1. 85 decibels (dB)

  2. 90 dB

  3. 95 dB

  4. 100 dB

Show answer
Correct Option: B
Explanation:

The PEL for noise in an 8-hour workday is 90 dB, as specified by OSHA regulations.

In a fire emergency, what is the primary action to take?

  1. Call 911

  2. Evacuate the building

  3. Use a fire extinguisher

  4. Stay in place and wait for instructions

Show answer
Correct Option: B
Explanation:

In a fire emergency, the primary action is to evacuate the building immediately.

Which of the following is a common cause of electrical accidents in the workplace?

  1. Overloaded circuits

  2. Damaged insulation

  3. Improper grounding

  4. All of the above

Show answer
Correct Option: D
Explanation:

All of the options mentioned are common causes of electrical accidents in the workplace.

What is the purpose of a safety data sheet (SDS) in a workplace?

  1. To provide information about the hazards of a chemical substance

  2. To list the ingredients of a chemical substance

  3. To provide instructions for using a chemical substance safely

  4. All of the above

Show answer
Correct Option: D
Explanation:

An SDS provides information about the hazards, ingredients, and safe handling procedures of a chemical substance.

Which of the following is NOT a common type of fire extinguisher?

  1. Water extinguisher

  2. Dry chemical extinguisher

  3. Carbon dioxide extinguisher

  4. Foam extinguisher

Show answer
Correct Option: D
Explanation:

Foam extinguishers are not as common as the other types mentioned.

What is the recommended frequency for inspecting fire extinguishers in a workplace?

  1. Monthly

  2. Quarterly

  3. Annually

  4. Every two years

Show answer
Correct Option: A
Explanation:

Fire extinguishers should be inspected monthly to ensure they are in proper working condition.

Which of the following is NOT a common type of hazard warning sign?

  1. Danger

  2. Warning

  3. Caution

  4. Notice

Show answer
Correct Option: D
Explanation:

Notice signs are not typically used as hazard warning signs.

What is the primary purpose of a lockout/tagout procedure?

  1. To prevent accidental energization of equipment during maintenance or repair

  2. To isolate energy sources during maintenance or repair

  3. To protect workers from hazardous chemicals

  4. To prevent unauthorized access to equipment

Show answer
Correct Option: A
Explanation:

Lockout/tagout procedures are primarily used to prevent accidental energization of equipment during maintenance or repair.

Which of the following is NOT a common type of personal protective equipment (PPE) used in healthcare settings?

  1. Gloves

  2. Masks

  3. Goggles

  4. Hard hat

Show answer
Correct Option: D
Explanation:

Hard hats are not typically used as PPE in healthcare settings.

What is the maximum allowable concentration of carbon monoxide (CO) in the air in a workplace, according to OSHA regulations?

  1. 50 parts per million (ppm)

  2. 100 ppm

  3. 200 ppm

  4. 300 ppm

Show answer
Correct Option:
Explanation:

The PEL for CO in a workplace is 50 ppm, as specified by OSHA regulations.

Which of the following is NOT a common type of hazard communication standard?

  1. Globally Harmonized System of Classification and Labelling of Chemicals (GHS)

  2. Occupational Safety and Health Administration (OSHA) Hazard Communication Standard

  3. National Fire Protection Association (NFPA) 704

  4. American National Standards Institute (ANSI) Z400.1

Show answer
Correct Option:
Explanation:

NFPA 704 is a fire safety standard, not a hazard communication standard.

What is the primary purpose of a confined space entry permit?

  1. To authorize entry into a confined space

  2. To identify hazards in a confined space

  3. To establish safe entry procedures for a confined space

  4. All of the above

Show answer
Correct Option: D
Explanation:

A confined space entry permit serves all of the purposes mentioned.

Which of the following is NOT a common type of hazard assessment tool?

  1. Job hazard analysis (JHA)

  2. Risk assessment matrix

  3. Safety audit

  4. Incident investigation report

Show answer
Correct Option: D
Explanation:

Incident investigation reports are not typically used as hazard assessment tools.

What is the recommended frequency for conducting safety training for employees?

  1. Annually

  2. Every two years

  3. Every three years

  4. As needed

Show answer
Correct Option: D
Explanation:

Safety training should be conducted as needed, based on the specific hazards and risks in the workplace.

- Hide questions
ADVERTISEMENT

Find more quizzes from top tags

general knowledge
3615 Quizzes
119858 Questions
 technology
307 Quizzes
36705 Questions
 sports
963 Quizzes
19148 Questions
 history
1187 Quizzes
13475 Questions
 physics
598 Quizzes
13441 Questions
 biology
1160 Quizzes
12174 Questions
 science & technology
551 Quizzes
11015 Questions
 chemistry
490 Quizzes
9892 Questions
 maths
518 Quizzes
9324 Questions
 softskills
0 Quizzes
7131 Questions